Safety

SG BASE safety light curtains are a simple, reliable and cost effective solution for applications where the use of Type 2 safety sensors with hand or arm resolution, and automatic restart, is required.

FEATURES & BENEFITS

• 19 m operating distance: for applications with wide areas to monitor or deviating mirrors
• Reduced response times (from 8 to 24 ms): installation close to dangerous areas, reducing the overall machine dimensions
• Rotating brackets: installation in small spaces and easy optical alignment in difficult conditions
• SG-IP69K protection for applications where cleaning with detergents or hot water at high pressure is required

APPLICATIONS

• Automatic machines
• Machines for packaging, material handling, storing
• Weaving machines, wood working machines, ceramic working machines
• Automatic and semi-automatic assembly lines
• Automatic warehouses

SG2 EXTENDED are Type 2 safety light curtains with hand and arm resolutions. Solely by changing the wiring, it is possible to select reset mode, activate EDM function and reduce the operating distance in case of mutual interference. Monitored heights go from 150 to 1800 mm, with 19 m maximum operating distance.

FEATURES & BENEFITS

• 19 m operating distance: wider application range, including those with deviating mirrors
• Reduced response time : installation close to dangerous areas and reduced machine dimensions
• Rotating brackets: installation in reduced spaces and easy optic alignment in extreme conditions
• EDM function: Option to connect the outputs to forced guided relays and maintain the same safety category
• Anti-Interference function: Option to install different safety light curtains side by side without optical interference, eliminating the need for mechanical separating shields

APPLICATIONS

• Automatic machines
• Machines for packaging, material handling, storing
• Weaving machines, wood working machines, ceramic working machines
• Automatic and semi-automatic assembly lines
• Automatic warehouses

SG4 BASE are Type 4 safety light curtains with finger and hand resolution and basic functions such as manual/automatic reset mode and EDM function. Ideal for applications without complex functions that need simple installation, wiring, configuration and use.

FEATURES & BENEFITS

• Operating distance up to 19 m (6 m for 14 mm resolution): suitable for applications that require wide monitored areas or deviating mirrors
• Models with 5-poles available for applications with automatic restart and without EDM function
• Reduced response times: possibility to install the light curtain close to dangerous areas, reducing the overall machine dimensions
• Rotating brackets: installation in reduced spaces and easy optic alignment in extreme conditions
• EDM function: Option to connect the outputs to forced guided relays and maintain the same safety category
• 7-segment display on transmitter and receiver for easier comprehension of diagnostic messages
• Guided alignment procedure: fast installation with a visual of the alignment degree on the receiver
• SG-IP69K: the protection degree increased from IP65 to IP69K for use in applications where cleaning with detergents or hot water at high pressure is required

APPLICATIONS

• Automatic machines
• Automatic machines
• Packaging and cutting machines
• Textile, wood-working and ceramic machines
• Automatic assembling lines
• Milling, lathe and shearing machines

SG4-H Safety Light Curtains, with their innovative Stainless Steel housing in a compact profile, offer the highest mechanical protection and washdown design for Pharmaceutical processing and packaging machinery applications where routine wash down and sterilization are vital to prevent bacterial contamination.Reaching IP69K protection, they can be used without need of additional protective accessory.

FEATURES & BENEFITS

• IP65 and IP69K full protection
• Housing: AISI316L Stainless steel with roughness under 0.8 micron
• Window: optical glass
• Rounded surfaces, with no gaps or sharp edges
• No labels: all information laser marked
• Maximum safety: type 4, finger resolution
• Three protection heights: 150, 300 and 450 mm
• 50 x 30 mm profile
• 4 LEDs and 7-segments display alignment aiding
• Basic functionality: only automatic restart
• 5 poles M12 connectors

APPLICATIONS

• Liquid filling machines
• Powder filling machines
• Closing and cap sealing machines

SG BODY COMPACT ( BASE and MUTING) are Type 2 and Type 4 safety light curtains with compact profile size for body protection (2,3 and 4 beams). SG BODY COMPACT BASE, with manual or automatic reset, EDM function and operating distance up to 50 m, are ideal to protect perimeters and openings, with simple wiring and configuration through DIP Switches. SG BODY COMPACT MUTING, with an integrated muting function, muting lamp and pre-assembled and pre-cabled muting sensors, are a complete and ready-to-use solution to protect openings.

FEATURES & BENEFITS

• IP65 and IP69K full protection
• Compact profile: 35x40 mm
• 2 different types of mounting brackets (SWIVELING SIDE for “THIN MOUNTING”, TOP-BOTTOM ROTATING)
• Simple and fast mounting, cabling and configuration
• Models with 5-poles available for applications with automatic restart and without EDM function
• User interface: 4 LEDs (receiver) or 2 LEDs (transmitter)
• Operating distance up to 50 m
• 2, 3, 4 beams with 500, 800, 900 and 1200 mm controlled heights
• Integrated T muting (bidirectional) and L muting (monodirectional) functions, integrated muting lamp (only SG BODY COMPACT MUTING)
• Models with T muting or L muting pre-assembled and pre-cabled retroreflective polarized sensors (only SG BODY COMPACT MUTING)

APPLICATIONS

• Automatic machines
• Robots
• Automatic assembling lines
• Palletizers and Depalletizers
• Protecting perimeter areas

SG BODY BIG (BASE and MUTING) safety light curtains, with sturdy housing and an innovative optical-electronic platform, ensures the high-level performance required in the material handling industry. SG BODY BIG BASE, with manual or automatic reset, EDM function and operating distance up to 60 m, is ideal to protect perimeters and openings in harsh environment, where a robust housing and high emission power is needed. SG BODY BIG MUTING integrates T and L muting functions with all the advanced features, like anti-interference coding, edged or triggered override, and external muting enable signal.

FEATURES & BENEFITS

• Big sturdy profile: 52x56 mm (2,08x2,24 in)
• 3 different types of mounting brackets (angled, top-bottom and rear)
• Simple and fast mounting, cabling and configuration
• User interface: 4 or 2 LEDs + 7 segment display
• Operating distance up to 60 m
• 2, 3, 4 beams with 500, 800, 900 and 1200mm controlled
• Integrated T muting (bidirectional) and L muting (monodirectional) functions, integrated muting lamp (only SG BODY BIG MUTING)
• Optional pre-assembled and pre-cabled retroreflective polarized or through-beam sensors (only SG BODY BIG MUTING)
• Advanced features: anti-interference coding, edged or triggered override, external muting enable signal
• LONG RANGE model with 40mm resolution for hand protection over long distance (60 m)

APPLICATIONS

• Automatic machines
• Robots
• Automatic assembling lines
• Palletizers and Depalletizers
• Protecting perimeter areas

SG BODY REFLECTOR (BASE and MUTING) are body protection Type 4 safety light curtains consisting of one active and one passive part, thus reducing installation, wiring time and costs. The sturdy housing and the optical-electronic characteristics, similar to SG BODY BIG, guarantee their reliability in harsh environments and alignment stability. SG BODY REFLECTOR MUTING can also have T and L muting sensors, and all advanced features related to muting, like anti-interference coding, edged or triggered override, and external muting enable signal.

FEATURES & BENEFITS

• 2, 3, 4 beams with 500, 800, 900 and 1200mm controlled heights
• One active part (emitter and receiver) and one passive part (mirrors)
• Big sturdy profile: 52x56 mm (2,08x2,24 in)
• 3 different types of mounting brackets (swiveling side for “thin mounting”, top-bottom and rear)
• User interface: 4 or 2 LEDs + 7 segment display
• Operating distance up to 8 m
• Integrated T muting (bidirectional) and L muting (monodirectional) functions, integrated muting lamp (only SG BODY REFLECTOR MUTING)
• Models with pre-assembled and pre-cabled retroreflective polarized muting sensors (only SG BODY REFLECTOR MUTING)
• Advanced features: Anti-interference coding, edged or triggered override, external muting enable signal

APPLICATIONS

• Automatic machines
• Robots
• Automatic assembling lines
• Palletizers and Depalletizers

SG2 MUTING is Type 2 safety light curtain with hand resolution, designed for applications that require muting function.

All models, with protective height from 300 mm to 1800 mm, have compact section dimensions and zero dead zone. Quick, easy configuration through pushbuttons.

FEATURES & BENEFITS

• Type 2
• 30 mm Resolution
• Zero Dead Zone
• Up to 20 m operating distance
• 300-1800 mm controlled height
• Basic Configuration Mode (BCM) through push-buttons
• Integrated muting function

APPLICATIONS

• Automotive
• Packaging
• Metalworking
• Woodworking
• Electronics

SG4 EXTENDED is a Type 4 safety light curtain, with finger and hand resolution, that perfectly combines easy of use with applicative flexibility, reliability and performance.Totally zero dead zone and series connection of up to three units (cascade) are the distinctive characteristic of all models, from 300 mm to 1800 mm of height. Integrated functions as total and partial muting, fixed and movable blanking guarantee full application coverage.

FEATURES & BENEFITS

Configuration of functions and parameters can be set two ways:
• For common applications: Basic Configuration Mode (BCM) easy and fast with push-buttons
• For more complex applications: Advanced Configuration Mode (ACM), with a Graphical User Interface (GUI) installed on a PC and connected through Ethernet

• Type 4
• 14 mm (finger) or 30 mm (hand)
• Compact dimensions (35 x 41 mm section)
• Zero dead zone
• Up to 20 m operating distance (7 m for 14 mm resolution)
• 300-1800 mm controlled height
• Basic Configuration Mode (BCM) through push-buttons
• Advanced Configuration Mode (ACM) through graphic user interface
• Cascade up to 3 units
• Integrated muting function
• Integrated fixed and floating blanking function

Dongle (accessory) for:

• Configuration cloning
• Ethernet (Tcp/Ip connection)
• Remote monitoring
• Remote programming
• Error logging

APPLICATIONS

• Automotive
• Packaging
• Metalworking
• Woodworking
• Electronics

SG-BWS Safety Units are ideal for safety systems that include S5, SL5 or S300 single beam sensors, as well as more complex systems, involving safety light curtains and muting sensors, due to their integrated functions and DIP switches. SG-BWS-T4: control unit equipped with 16 clamps that can connect from 1 to 4 photocell couples of the S5-ST, SL5-ST, S300 series with OSSD safety outputs. SG-BWS-T4-MT: control unit equipped with 48 clamps that can connect from 1 to 4 photocell couples of the S5-ST, SL5-ST, S300 series and concurrently with up to 2 safety light curtains equipped with safety outputs activated with two 230V relay.

FEATURES & BENEFITS

• SG-BWS-T4: monitors from 1 to 4 S5, SL5 or S300 photocell couples; 2 OSSD redundant safety outputs
• SG-BWS-T4-MT: monitors from 1 to 4 S5, SL5 or S300 photocell couples togheter with 2 safety light curtains; 2 NO redundant force guided relays outputs and 2 muting indicator outputs
• Compact dimensions: width SG-BWS-T4: 22,6 mm; width SG-BWS-T4-MT: 67,8 mm
• Extremely rapid and easy mounting, cabling and configuration thanks to spring loaded slide for DIN rail fastening, removable terminal clamps, and selection of functions through DIP switches
• Integrated safety functions: manual and automatic reset, EDM, T and L muting, Override

APPLICATIONS

• Automotive
• Robots
• Automatic assembling lines
• Palletizers and Depalletizers
• Protecting perimeter areas

S5-SG-ST and SL5-SG-ST safety sensors are certified for integration with SG-BWS-T4 units, a Type 2 or Type 4 safety system (depending on the model used). When placed appropriately, they can be used in substitution of body protection safety light curtains, or to guard small size openings.

FEATURES & BENEFITS

• Emitter-receiver photocells with test input on emitter
• Maximum operating range: 8 m for S5, 40 m for SL5
• M18 Tubular form in plastic
• Effective aperture angle : ±2,5° for Type 4 models, ±5° for Type 2 models (IEC 61496-2)
• Emission: infrared LED for S5, Class 1 red laser for SL5
• M12 4-poles connectors

APPLICATIONS

• Automotive
• Robots
• Automatic assembling lines
• Palletizers and Depalletizers
• Protecting perimeter areas

S300-SG-ST safety sensors have been certified for integration with SG-BWS-T4 units, a Type 2 or Type 4 safety system (depending on the model used). DEFOGGING models, with heated front glass, are ideal for applications where sudden changes of the temperature can cause condensation. When placed appropriately, they can be used in substitution of body protection safety light curtains, or to guard small size openings.

FEATURES & BENEFITS

• Emitter-receiver photocells with test input on emitter
• Maximum operating range : 8 m for S300-SG-ST2; 50m for S300-SG-ST4
• Rectangular shape ( 25 mm x 85 mm x 70 mm) in plastic
• Effective aperture angle : ±2,5° for Type 4 models, ±5° for Type 2 models (IEC 61496-2)
• Emission: infrared LED
• M12 4-poles connectors
• Operating temperature: -40° - 55°C

APPLICATIONS

• Automotive
• Robots
• Automatic assembling lines
• Palletizers and Depalletizers
• Protecting perimeter areas

SG-PSB protection stands and SG-PSM mirrors stands simplify the installation of safety light curtains in perimeter applications. SG-PSB: Available in 5 heights from 600 mm to 1900 mm, with a robust aluminum housing mounted on a steel base. SG-PSM: Integrates into the same profile as SG-PSB 2, 3 or 4 single mirrors, for 500, 800, 900 and 1200 mm controlled heights.

FEATURES & BENEFITS

• Compatible with all SG family safety light curtains, thanks to ST-PS mounting kits
• Single base with 2 disks for flatness regulation and angular adjustment
• Upper plate grooves positioned at most common angles (30°, 45°, 60°, 90°)
• Spherical level ball
• Additional accessory kit (SG-P) of squared plate with 3 load springs
• According to EN ISO 13855 standard

APPLICATIONS

• Automotive
• Perimeter protections
• Loading areas
• Changing tools and programs areas

SG-SRT series interfaces are designed to be used with SG BODY BIG, SG BODY REFLECTOR and SG BODY COMPACT safety light curtains, guaranteeing easy installation and use.

SG-SRT is provided in 2 different models:

• SG-SRT-1 standard version
• SG-SRT-2 advanced version designed to integrate with SG BODY BIG and SG BODY REFLECTOR series and their full range of functionalities

FEATURES & BENEFITS

• Integrated force guided relays (2 NO + 1 NC)
• Configuration performed setting jumpers on PCB
• SG-SRT2 model with integrated muting indicator

APPLICATIONS

• Palletizers and depalletizers
• Automatic machines
• Robots
• Automatic assembly lines

Two types of cables with M12 connectors are available: CS (unshielded) and CV (shielded). Shielded cables are needed with SE series safety light curtains.

FEATURES & BENEFITS CS Unshielded:

• M12 axial or radial connector and cable with 3, 4, 5, 8, and 12 poles
• Cable length: 3, 5, 7, 10, 15, 25, and 50 m
• Cable material: PVC

CV Shielded:

• M12 axial or radial connector and cable with 4 and 8 poles
• Cable length: 3, 5, 10, 15, and 25 m
• Cable material: PVC

SG Series safety light curtains are already equipped with mounting brackets, with the exception of the SG BODY BIG and SG BODY REFLECTOR.

As spare parts, and for specific applications , many different mounting kits are available:

• Fixing angled brackets for side mounting in metal (ST-KSTD) and in plastic (ST-KPxMP)
• Fixing brackets for rear mounting (ST-KxREAR)
• Rotating brackets for top-bottom mounting (ST-KxROT)
• Adjustable supports (ST-KxOR)
• Anti-vibration supports (ST-KxAV)

Category 4 safety unit, compatible with all DATALOGIC safety light curtains.

FEATURES & BENEFITS

• PL e(EN ISO 13849-1); SIL 3 (IEC 61508)
• 2 redundant inputs for double channel devices
• 4 force guided safety relays outputs (3 NA e 1 NC)
• Automatic, manual or monitored reset
• EDM function

Interface with integrated force guided relays, is an efficient alternative to wiring multiple force guided relays. It can be used with all SG series safety light curtains with EDM (External device monitoring) function.

FEATURES & BENEFITS

• Precabled force guided relays (3NO, 1NC)
• Front terminal block: extremely fast cabling
• DIN rail mounting: ease installation

SG-DM series mirrors allow for integration in perimeter applications with finger, hand and body resolution safety light curtains as well as with single beams.

FEATURES & BENEFITS

• Heights: 150 mm for single beam, from 600 to 1900 mm for safety light curtains
• Width: 80 mm, space saving design, while maintaining excellent optical performances
• 80 mm width: space saving design while maintaining optical performances
• Possible installation directly on the machine, on floor columns (SE-S) or inside robust stands (SG-PSB) to protect them from shocks
• Vertical and horizontal adjustment with brackets

APPLICATIONS

• Perimeter protections

SG-IP69K are PMMA tubes used to protect safety light curtains SG2 BASE, SG2 EXTENDED, SG4 BASE and SG BODY COMPACT.

They are available in protection degrees IP67, IP68 and IP69K for harsh environments.

FEATURES & BENEFITS

• Heights from 150 to 1800 mm
• Gore-Tex membranes on the caps prevent water and dirt from entering as well as internal condensation
• M16 metric cable gland: keeps the connection cable preventing the entrance of water or dirt in place

APPLICATIONS

• Machines washed with hot water under pressure, or with aggressive cleansers

SG-LS is a PMMA plate to be mounted on the front glass of the light curtain to protect it against dust, splinters and drops of incandescent material from material working or welding.

FEATURES & BENEFITS

• Heights from 150 to 1800 mm
• Available for safety light curtain SG2 BASE, SG2 EXTENDED, SG4 BASE and SG BODY COMPACT
• 5 plates supplied in the package for complete replacement

APPLICATIONS

• Punching machines
• Milling machines
• Welding machines

Laser pointer, to assist in the alignment of safety light curtains over long distances or when mirrors are used.

FEATURES & BENEFITS

• Class 2 red laser
• With wo brackets and tightening knobs, the fixing equipment aligns the laser with each SE or SG series light curtain's optical axis
• The laser pointer can be inserted into one of the two lateral grooves either from the top or bottom

APPLICATIONS

• Plants and production lines that require protection over long distances
• Perimeter protections of machines using mirrors

SE-S floor column supports both safety light curtains and SG-DM deviating mirrors.

FEATURES & BENEFITS

• Heights: 800, 1000 and 1200 mm (30x30 mm profile); 1500 and 1800 mm (45x45 mm profile)
• Ground fixing plate dimensions: 240x240 mm

LMS are muting lamps: standard, tower modular, with horizontal and vertical mounting.

Test pieces to verify if the resolution of safety light curtains is maintained throughout monitored area. Available in 14, 20, 30, 35, 40, 50 and 90 mm diameters.