Compact mini slide
7 bore sizes 6mm to 25mm
Stroke lengths 10mm to 200mm
Payloads up to 17kg
Slide and yoke plate as a single component
Excellent price/performance ration
High feed forces
Symmetrical mounting interfaces
Precise and resilient roller bearing guides
Simple design with symmetrical mounting interfaces
Can be operated without additional cushioning components

Lighter than other semi-rotary drives
Housing protected against splash water and dust
Size 6, 8, 12, 16, 25, 32, 40 mm
Torque 0.15 ... 20 Nm
Swivel angle 90, 180, 270°
Position sensing
Fixed elastic cushioning elements on both sides

The new generation in single valves: high-flow, robust and low cost

• Suitable for a broad range of applications from simple clamping applications to machine builder
• Available as an electrically or pneumatically actuated valve
• Can be expanded to for a valve terminal with an individual connection
• DC and AC voltage options

Easy to clean, highly corrosion-resistant, extremely sturdy and extremely functional. Ideal for direct installation in cleaning-intensive environments

• FDA certified materials and NSF-H1 lubrication for use in the food industry
• Degree of protection IP69K with redundant sealing system
• Multi-pin plug connection or fieldbus/Ethernet via bus nodes CTEU and connecting plate CAPC
• Single module sub-bases
• Large pressurisation and exhaust cross-section

The compact cylinder series ADN/AEN complies with the standard ISO 21287. The ADN/AEN is distinguished by its compact design and broad area of application thanks to the large number of variants. The variants can be configured according to individual needs thanks to the modular design.
Diameter 12 – 125 mm
Stroke length 1 … 500 mm
Single or Double-acting
Position sensing
Cushioning fixed/self-adjusting
Female / Male thread
Single or Double rod

The EPCC is the ideal compact, flexible, precise, and cost-effective electric actuator for multiple stopping positions and programmable force. Available with either Festo’s full range motion control packages or pair with your own motors and drives with standard motor couplings. Let Allied Automation assist you with sizing and selection to reduce the time and stress to implement.

Sizes 4, 6, 9, 12
Port G1/8, G1/4, G3/8, G1/2, G3/4, G1, G1 1/4, G1 1/2, G2 also available with NPT thread
Pressure 0.3 … 12 bar
Flow rate 550 … 17,000 l/min
Pressure gauge with bar, psi, MPa
Grade of filtration 0.01 … 40 µm
Condensate drain

• Manual
• Semi-automatic
• Fully automatic

Plastic bowl with plastic bowl guard
Metal bowl guard
Flow direction

• From left to right
• From right to left

Proportional lubricator
Flush gauges to reduce damage and a more attractive appearance
Regulator lock to eliminate unauthorized adjustment. Use your own padlock or tie wrap
Easy assembly or replacement of modules

Standards-based cylinders to ISO 15552 Double-acting Contactless position sensing Optional protection against rotation Extensive range of accessories makes it possible to install the cylinder virtually anywhere Three types of cushioning available:

• Bumpers (P)
• Adjustable (PPV)
• Self Compensating (PPS) Cushions

Excellent flexibility thanks to the wide range of variants.

• Diameter 32 – 125 mm
• Stroke length 1 … 2800 mm
• Double-acting
• Male /Female thread
• Heat resistant, low friction, brake, rod scraper, double rod and many more options.

The EGSC-BS is a highly compact, rod-driven guided electric actuator. Flexible mounting and easily combined with the ELGC for quick and easy implementation.  Available with either Festo’s full range motion control packages or pair with your own motors and drives with standard motor couplings. Stocked in common sizes and travel distances for quick delivery.

Flow rate 0 … 3300 l/min
Port M3, M5, G1/8, G1/4, G3/8, G1/2, G3/4
Plug connector 3, 4, 6, 8, 10, 12 mm
Shut-off valves
Non-return and flow control valves

Fieldbus + multi-pin
Flow rate 160 … 870 l/min.
Width 10 and 20 mm
Protection class IP65
Valve functions 5/2, 5/3, 2×3/2, 2×2/2 and special functions

Without external guide, for simple drive functions
Diameter: 18, 25, 32, 40, 50, 63, 80 mm
Stroke length: 1 … 8500 mm
Force: 153 … 3016 N
Position sensing
1:1 interchangeable with linear drive DGP
30% narrower than the DGC-G
Low moving dead weight
Symmetrical design

Size 4, 6, 8, 10, 12, 16, 20, 25
Diameter 6, 8, 10, 12, 16, 20, 25, 32 mm
Stroke length 10 … 200 mm
Force 17 … 483 N
Position sensing
Fixed/adjustable cushioning
Ball bearing cage guide

Future-proof ISO 15407-2 standard valves & sub-bases for sizes 02, 01, 1, 2 & 3
Flexible and robust industrial design
Common valves for standalone or manifold mount
Easily modified in the field
Detent, momentary, or covered overrides
Controlled via fieldbus or control block
Max. 32 valve positions/max. 32 solenoid coils
Max. 10 electrical modules

• Digital inputs/outputs
• Analog inputs/outputs
• Parameterization of inputs and outputs
• Integrated convenient diagnostics system
• Preventive maintenance concepts

ELGC-BS Ball Screw or ELGC-TB Belt Driven actuators for compact, cost-effective motion control applications with quick delivery.  Internal guides and protected drive mechanism. Available with either Festo’s full range motion control packages or pair with your own motors and drives with standard motor couplings. Stocked in common sizes and travel distances for quick delivery.

DGC-G for light loads using composite bearing
DGC-GF Small to medium loads using composite bearing
DGC-KF Recirculating linear ball bearing for higher loads, longer life, lower friction, and greater precision – Festo’s most popular model
DGC-HD Dual recirculating linear ball bearing for the heaviest loads
8 – 63mm Piston Diameter
Stroke lengths to 8500mm
Adjustable stops, shocks or cushions
Power-off brake
Intermediate stop option
Industry leading low leakage seals
Speed regulation/connection on one end and multiple sides

Diameter, inches 5/8″ to 5″
Stroke length, inches 0.04″ to 12″
Force 20.23 lbf to 1059 lbf
Position sensing
Fixed cushioning

Connection R1/8, R1/4, R3/8, R1/2
For outside tubing diameter 4, 6, 8, 10, 12, 16 mm
Threaded connection
R thread with PTFE coating
Suitable for vacuum
Push-in fittings
Push-in connectors

Size 6, 8, 12, 16, 20, 25, 40, 50, 63, 80, 100 mm
Torque 0.16 … 150 Nm
Swivel angle 0 … 360°
Semi-rotary drive up to 360 degrees with rack and pinion
Rack and pinion principle
Very high accuracy in the end positions
Very high load bearing capacity
Very good axial run-out at the flanged shaft
High mass moments of inertia
Low-backlash and dynamic
Splash-proof design to IP65 based on EN 60529
Defined interfaces
Supply port at one end
Choice of mounting options
Ideal for use in handling applications

The new DSBG large-diameter cylinders in bore sizes 160mm and 200mm are powerful, lightweight, and durable thanks to the design of the end caps and piston using finite element analysis (FEA). They are suitable for use in harsh operating conditions, such as the mining industry and operating process valves. A full range of mounting accessories are available, as well as optional integrated stud bolts for easy vertical or horizontal installation.

Future-proof ISO 15407-2 standard valves & sub-bases for sizes 02, 01, 1, 2 & 3 Flexible and robust industrial design Controlled via multi-pin plug Max. 32 valve positions/max. 32 solenoid coils Connection technology:

• 37-pin Sub-D
• Terminal strip
• 19-pin round plug connector
• Connecting thread G

ISO 6432
Round cylinder
Cylinder barrel made of stainless steel
Bearing and end caps made of wrought aluminum alloy
Diameter: 8 – 63mm
Stroke length: 1 … 500 mm
Single (ESNU) or Double-acting (DSNU)
Position sensing
Fixed/adjustable/self-adjusting cushioning
Internal or external thread

Size: 32, 40, 50, 63, 100 Stroke length: 1 … 1500 mm Force: 6000 … 17,000 N Motor attachable via axial or parallel kit Linear drive with ball screw in clean design

Outside diameter: 2, 3, 4, 6, 8, 10, 12, 14, 16 mm
Outside diameter: 1/8″, 5/32″, 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 5/8″
Standard OD
Operating medium

• Compressed air
• Vacuum
• Water

Materials

• Polyamide
• Polyvinyl chloride
• Perfluoroalkoxy alkane
• Polyethylene
• Polyurethane

DUO tubing

Diameter 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 mm
Stroke length 10 … 400 mm
Force 51 … 4712 N
Position sensing
Fixed/adjustable cushioning
Plain-bearing guide
Recirculating ball bearing guide
Variants available

Size 35, 45, 55, 75
Stroke length 50 … 300 mm

Flow rate 80 … 780 l/min Width 10, 14, 18 mm Connection M3, M5, M7, G 1/8 Push-in connector 3, 4, 6, 8 mm Electrical individual connection Voltage 5, 12, 24 V DC Pressure -0.9 … 10 bar Protection class IP40 / IP65 Semi in-line valves and sub-base valves Metal manifold rail from the VG series

Diameter 12, 16, 20, 25, 32 mm
Stroke length 16 … 400 mm
Force 51 … 483 N
Recirculating ball bearing guide
Pneumatic drive with linear guide but specially designed for handling units

Size 70, 80, 120, 185 mm
Stroke length 50 … 3000 mm
Force 300 … 3000 N

Flow rate: 120 … 630 l/min Width: 10, 14 mm Connection: M5, M7, G 1/8 Plug connector: 3, 4, 6, 8 mm Multi-pin, fieldbus, IO-Link, I-Port Voltage: 24 V DC Pressure: -0.9 … 10 bar Protection class: IP40/IP67 Semi in-line and sub-base valves Metal manifold rail

Size 125, 160, 220 mm
Stroke length 50 … 2400 mm
Force 300 … 1300 N

Diameter 16, 20, 25, 32, 40 mm
Stroke length 10 … 200 mm
Force 102 … 660 N
Swivel angle 0 … 272°
Torque 1.25 … 20 Nm
Position sensing
Through piston rod

High repetition accuracy thanks to cushioning components with fixed stop. Swivel angle can be infinitely and accurately set. The mechanical gearing between the stop element and swivel module prevents movement of the stop system under load.

Compact sensing of the swivel motion via proximity sensors
SME/SMT-10F
With plain-bearing guide
With recirculating ball bearing guide
Swivel motion of up to 270°
Linear motion of up to 200 mm stroke
Both motion types can be controlled individually or simultaneously
High rotational energy during swivelling thanks to directly mounted, self-adjusting shock absorbers
Supply ports at one end for quick, clear-cut tubing connections
High precision thanks to recirculating ball bearing guide
Backlash-free swivel motion
Resists torque loads even during linear motion

Size 50, 70, 80, 120, 185 mm
Stroke length 50 … 8500 mm
Force 50 … 2500 N

Size 125, 160, 220 mm
Stroke length 50 … 5000 mm
Force 450 … 1800 N

**Allied Automation suggests the EPCC actuator for new applications** Size: 16, 25, 40 Stroke length: 50 … 500 mm Force: 50 … 650 N Permanently mounted motor Linear drive with ball screw, non-rotating piston rod with plain bearing guide